Why Hand-Scraped Flooring?

So many types of flooring possibilities exist on the market, so why hand-scraped hardwood and why now? Trends for hardwoods come and go. In recent years, the demand for exotic species has grown, and even more closer to the present, requests for hand-scraped flooring are also increasing. As a result, nearly all species are available hand-scraped, but walnut, hickory, cherry, and oak are the most popular.

In the past, parquet was a popular style of flooring, and while seldom seen in the present, parquet was characterized by an angular style and contrasting woods. Not relying on color, hand-scraped flooring instead goes for texture. The wood is typically scraped by hand, creating a rustic and unique look for every plank. But rather than be exclusively rough, some hand-scraped products have a smoother sculpted look, such as hand-sculpted hardwood, and this flooring is often considered "classic."

Texture, as well, makes the flooring have additional visual and tactile dimensions. Those walking on the floor may just want to run their hands over the surface to feel the knots, scraping, and sculpted portions. However, tastes for hand-scraped flooring vary by region. According to top hardwood manufacturer Armstrong, the sculpted look is more requested in California, while a rustic appearance of knots, mineral streaks, and graining is more common in the Southwest. The Northeast, on the other hand, is just catching onto this trend.

There's no one look for hand-scraped flooring. Rather, hardwood is altered through scraping or brushing, finishing, or aging; a combination of such techniques may also be used.

Scraped or brushed hardwoods are sold under names "wire brushed," which has accented grain and no sapwood; "hand-sculpted," which indicates a smoother distressed appearance; and "hand hewn and rough sawn," which describes the roughest product available.

Aged hand-scraped products go by "time worn aged" or "antique." For both of these, the wood is aged, and then the appearance is accented through dark-colored staining, highlighting the grain, or contouring. A lower grade of hardwood is used for antique.

A darker stain tends to bring out the look of hand-scraped flooring. For woods that have specifically been stained, "French bleed" is the most common. Such a product has deeper beveled edges, and joints are emphasized with a darker color stain.

No matter the look for hand-scraped flooring, the hardwood is altered by hand, generally by a trained craftsman, such as an Amish woodworker. As a result, every plank looks unique. However, "hand-scraped" and "distressed" are often used interchangeably, but not all "distressed" products are altered by hand. Instead, the hardwood is distressed by machine, which presses a pattern into the surface of the wood.

Source:http://www.articlesbase.com/home-improvement-articles/why-hand-scraped-flooring-5488704.html

Choose Mining Wear Parts Wisely

It is important to choose a reputable supplier of mining wear parts; one that has been acknowledged as a leader in mining expertise. You will want to research and seek out a company that specializes in the engineering, manufacturing, procurement and design of mining wear parts and who has access to a multitude of patterns and templates to choose from.

It is vital to find a company that invites you to put them to the test; a company that is committed to selling more than just a product, standing behind the parts that they design and manufacture with an unprecedented industry guarantee. Some companies are so confident in their products that each wear part is stamped with their logo, identifying it as a superior product.

You will also want to find a company that takes pride in establishing strong customer relationships and who employs people who are as equally committed to providing outstanding service with customer satisfaction a priority. Your research will help you find a mining wear parts company that guarantees that if they do not have the part available, that they will find it for you or are capable of custom designing products to your exact specifications.

If you stop to consider the ramifications of an equipment malfunction or breakdown on production quotas, the significance of reliable parts becomes readily apparent. The impact can be far reaching if it halts production while the necessary repairs are completed. The ugly reality is that downtime incurs financial losses.

While the cost of aftermarket replacement mining wear parts is one factor, the installation of the part is equally as important. It is vital that aftermarket parts are built to a rugged standard to endure the rigorous industrial demands placed on them. Mining wear parts are routinely subjected to high stress abrasion and impact. The fabricated parts need to have the structural strength to be wear resistant with extended usage. Hardened manganese is the preferred material of choice to impart added strength and avoid premature breakage and replacement. Using inferior quality parts may result in the necessity of replacing them prematurely if they do not withstand the wear and tear that they are subjected to daily. While a few dollars may be saved initially by purchasing inferior mining wear parts, production costs can dramatically increase if frequent breakdowns occur and manpower hours are wasted in the field. Efficient use of manpower is an important budget consideration. Reliability is an absolute necessity w
hen you have production deadlines to meet and operations can quickly grind to a standstill when production is halted.

Quality assurance management monitors the consistency of the parts, demanding that they are machined within precise measurements. In addition, they focus on striving to improve the quality of parts as new technology becomes available. Using precision made, high quality wear parts can make your business more competitive, giving you an advantage and improving your bottom line.

Source:http://ezinearticles.com/?Choose-Mining-Wear-Parts-Wisely&id=6691631

Affordable Tooth Extractions

In recent times, the cost of dental care has skyrocketed. This includes all types of dentistry including teeth cleaning, extractions, and dental surgery. For those who live in Denver, CO, there are many options to choose from when paying for routine or emergency dental care. In fact, having a tooth extraction Denver might just be more easily afforded than what some may be aware of.

The flat fee for a tooth extraction in Denver may vary between dental offices. The type of extraction can also cause a difference in the price. A simple extraction may cost between $60-$75, but a wisdom tooth extraction that requires more time and effort could cost much more.

One of the great aspects of having dental services performed in Denver is the variety of payment forms that many dental offices accept. Most dental offices in this area accept several different health insurance plans that will allow patients to only be required to pay a small copay at the time of service. If you have chosen an in-network dental provider for your plan, this copay can be even less.

Many dental offices also provide services to those who have state medicaid or medicare as well. While cosmetic dental work may not be covered by these forms of health care, extractions are covered because they are considered a necessary part of the patients good health. Yearly checkups and teeth cleanings are also normally covered as a preventative measure to avoid bad dental health.

For those who may not have any type of health insurance, dental insurance, or state provided health care plan, most dental offices will offer a payment plan. The total cost will be calculated and can be divided up over a few months to make dental care more easily affordable. This will need to be arranged before services and you may need to pay a percentage of the cost upfront before any dental work is performed.

So, if you live in the Denver area and need to have a tooth extraction or other dental care, do not fear that it is impossible to obtain. By calling each dental office and discussing the types of payment forms they accept, you may find a payment plan that fits your budget nicely. You can compare the prices and options of all dentists in your area so that you can make a well informed decision more easily.

Source:http://ezinearticles.com/?Affordable-Tooth-Extractions&id=3241427

Git workflow for Scrapy projects

Our customers often ask us what’s the best workflow for working with Scrapy projects. A popular approach we have seen and used in the past is to split the spiders folder (typically project/spiders) into two folders: project/spiders_prod and project/spiders_dev, and use the SPIDER_MODULES setting to control which spiders are loaded on each environment. This works reasonably well, until you have to make changes to common code used by many spiders (ie. code outside the spiders folder), for example common base spiders.

Nowadays, DVCS (in particular, git) have become more popular and people are quite used to branching, so we recommend using a simple git workflow (similar to GitHub flow) where you branch for every change you make. You keep all changes in a branch while they’re being tested and finally merge to master when they’re finished. This means that master branch is always stable and contains only “production-ready” spiders.

If you are using our Scrapy Cloud platform, you can have 2 projects (myproject-dev, myproject-prod) and use myproject-dev to test the changes in your branch.  scrapy deploy in Scrapy 0.17 now adds the branch name to the version name (when using version=GIT or version=HG), so you can see which branch you are going to run directly on the panel. This is particularly useful with large teams working on a single Scrapy project, to avoid stepping into each other when making changes to common code.

Here is a concrete example to illustrate how this workflow works:y

•    the developer decides to work on issue 123 (could be a new spider or fixes to an existing spider)
•    the developer creates a new branch to work on the issue
•    git checkout -b issue123
•    the developer finishes working on the code and deploys to the panel (this assumes scrapy.cfg is configured with a deploy target, and using version=GIT – see here for more information)
•    scrapy deploy dev
•    the developer goes into the panel and runs the spider, where he’ll see the branch name (issue123) that will be run
•    the developer checks the scraped data looks fine through the item browser in the panel
•    whenever issues are found, the developer makes more fixes (always working on the same branch) and deploys new versions
•    once all issues are fixed, the developer merges the branch and deploys to production project
•    git checkout master
•    git merge issue123
•    git pull # make sure to pull latest code before deploying
•    scrapy deploy prod

We recommend you keep your common spiders well-tested and use Spider Contracts extensively to test your final spiders. Otherwise experience tell us that base spiders end up being copied (instead of reused) out of fear of breaking old spiders that depend on them, thus turning their maintenance into a nightmare.

Source:http://blog.scrapinghub.com/2013/03/06/git-workflow-scrapy-projects/

A quick guide on web scraping: Why and how

Web scraping, which is the collection and cleaning of online data, is the first step in any
data-driven project. Here’s a short video that explains what scraping is, and how to create
automated scraping jobs using a digital tool.

This is a 15-minute video created by an instructor at Ohio State University. In the first six
minutes, the instructor talks about why we need web scraping; he then shows how to use a
scraping tool, OutWit Hub, to collect data scattered in a large database.

FYI: read reviews by Reporters’ Lab of OutWit Hub and other web scraping tools.

Source: http://www.mulinblog.com/quick-guide-web-scraping/

Why scraping and why TheWebMiner?

If you read this blog you are one of two things: you are either interested in web scraping and you have studied this domain for quite a while, or you are just curious about this relatively new field of interest and want to know what it is, how it’s done and especially why. Either way it’s fine!

In case you haven’t googled already this I can tell you that data extraction (or scraping) is a technique in which a computer program extracts data from human-readable output coming from another program (wikipedia). Basically it can collect all the information on a certain subject from certain places. It’s sort of the equivalent of ctrl+f, at the scale of the whole internet. It’s nothing like the search engines that we currently use because it can extract the data in a certain file, as excel, csv (coma separated values) or any other that the buyer wants, and also extracts only the relevant data, only the values that you are interested in.

I hope now that you understand the concept and you are wondering just why would you need such data. Well let’s take the example of an online store, pretty common nowadays, and of course the manager just like any manager wants his business to thrive, so, for that he has to keep up with the other online stores. Now the web scraping takes place: it is very useful for him to have, saved as excels all the competitor’s prices of certain products if not all of them. By this he can maintain a fair pricing policy and always be ahead of his competitors by knowing all of their prices and fluctuations.  Of course the data collecting can also be done manually but this is not effective because we are talking of thousand of products each one having its own page and so on. This is only one example of situation in which scrapping is useful but there are hundreds and each one of them it’s profitable for the company.

By now I’ve talked about what it is and why you should be interested in it, from now on I’m going to explain why you should use thewebminer.com. First of all, it’s easy: you only have to specify what type of data you want and from where and we’ll manage the rest. Throughout the project you will receive first of all an approximation of price, followed by a time approximation. All the time you will be in contact with us so you can find out at any point what is the state of your project. The pricing policy is reasonable and depends on factors like the project size or complexity. For very big projects a discount may be applicable so the total cost be within reason.

Now I believe that thewebminer.com is able to manage with any kind of situation or requirement from users all over the world and to convince you, free samples are available at any project you may have or any uncertainty or doubt.

Source:http://thewebminer.com/blog/2013/07/

Web Scraping Tools for Non-developers

I recently spoke with a resource-limited organization that is investigating government corruption and wants to access various public datasets to monitor politicians and law firms. They don’t have developers in-house, but feel pretty comfortable analyzing datasets in CSV form. While many public datasources are available in structured form, some sources are hidden in what us data folks call the deep web. Amazon is a nice example of a deep website, where you have to enter text into a search box, click on a few buttons to narrow down your results, and finally access relatively structured data (prices, model numbers, etc.) embedded in HTML. Amazon has a structured database of their products somewhere, but all you get to see is a bunch of webpages trapped behind some forms.

A developer usually isn’t hindered by the deep web. If we want the data on a webpage, we can automate form submissions and key presses, and we can parse some ugly HTML before emitting reasonably structured CSVs or JSON. But what can one accomplish without writing code?

This turns out to be a hard problem. Lots of companies have tried, to varying degrees of success, to build a programmer-free interface for structured web data extraction. I had the pleasure of working on one such project, called Needlebase at ITA before Google acquired it and closed things down. David Huynh, my wonderful colleague from grad school, prototyped a tool called Sifter that did most of what one would need, but like all good research from 2006, the lasting impact is his paper rather than his software artifact.

Below, I’ve compiled a list of some available tools. The list comes from memory, the advice of some friends that have done this before, and, most productively, a question on Twitter that Hilary Mason was nice enough to retweet.

The bad news is that none of the tools I tested would work out of the box for the specific use case I was testing. To understand why, I’ll break down the steps required for a working web scraper, and then use those steps to explain where various solutions broke down.

The anatomy of a web scraper

There are three steps to a structured extraction pipeline:

    Authenticate yourself. This might require logging in to a website or filling out a CAPTCHA to prove you’re not…a web scraper. Because the source I wanted to scrape required filling out a CAPTCHA, all of the automated tools I’ll review below failed step 1. It suggests that as a low bar, good scrapers should facilitate a human in the loop: automate the things machines are good at automating, and fall back to a human to perform authentication tasks the machines can’t do on their own.

    Navigate to the pages with the data. This might require entering some text into a search box (e.g., searching for a product on Amazon), or it might require clicking “next” through all of the pages that results are split over (often called pagination). Some of the tools I looked at allowed entering text into search boxes, but none of them correctly handled pagination across multiple pages of results.

    Extract the data. On any page you’d like to extract content from, the scraper has to help you identify the data you’d like to extract. The cleanest example of this that I’ve seen is captured in a video for one of the tools below: the interface lets you click on some text you want to pluck out of a website, asks you to label it, and then allows you to correct mistakes it learns how to extract the other examples on the page.

As you’ll see in a moment, the steps at the top of this list are hardest to automate.

What are the tools?

Here are some of the tools that came highly recommended, and my experience with them. None of those passed the CAPTCHA test, so I’ll focus on their handling of navigation and extraction.

    Web Scraper is a Chrome plugin that allows you to build navigable site maps and extract elements from those site maps. It would have done everything necessary in this scenario, except the source I was trying to scrape captured click events on links (I KNOW!), which tripped things up. You should give it a shot if you’d like to scrape a simpler site, and the youtube video that comes with it helps get around the slightly confusing user interface.

    import.io looks like a clean webpage-to-api story. The service views any webpage as a potential data source to generate an API from. If the page you’re looking at has been scraped before, you can access an API or download some of its data. If the page hasn’t been processed before, import.io walks you through the process of building connectors (for navigation) or extractors (to pull out the data) for the site. Once at the page with the data you want, you can annotate a screenshot of the page with the fields you’d like to extract. After you submit your request, it appears to get queued for extraction. I’m still waiting for the data 24 hours after submitting a request, so I can’t vouch for the quality, but the delay suggests that import.io uses crowd workers to turn your instructions into some sort of semi-automated extraction process, which likely helps improve extraction quality. The site I tried to scrape requires an arcane combination of javascript/POST requests that threw import.io’s connectors for a lo
op, and ultimately made it impossible to tell import.io how to navigate the site. Despite the complications, import.io seems like one of the more polished website-to-data efforts on this list.

    Kimono was one of the most popular suggestions I got, and is quite polished. After installing the Kimono bookmarklet in your browser, you can select elements of the page you wish to extract, and provide some positive/negative examples to train the extractor. This means that unlike import.io, you don’t have to wait to get access to the extracted data. After labeling the data, you can quickly export it as CSV/JSON/a web endpoint. The tool worked seamlessly to extract a feed from the Hackernews front page, but I’d imagine that failures in the automated approach would make me wish I had access to import.io’s crowd workers. The tool would be high on my list except that navigation/pagination is coming soon, and will ultimately cost money.

    Dapper, which is now owned by Yahoo!, provides about the same level of scraping capabilities as Kimono. You can extract content, but like Kimono it’s unclear how to navigate/paginate.

    Google Docs was an unexpected contender. If the data you’re extracting is in an HTML table/RSS Feed/CSV file/XML document on a single webpage with no navigation/authentication, you can use one of the Import* functions in Google Docs. The IMPORTHTML macro worked as advertised in a quick test.

    iMacros is a tool that I could imagine solves all of the tasks I wanted, but costs more than I was willing to pay to write this blog post. Interestingly, the free version handles the steps that the other tools on this list don’t do as well: navigation. Through your browser, iMacros lets you automate filling out forms, clicking on “next” links, etc. To perform extraction, you have to pay at least $495.

    A friend has used Screen-scraper in the past with good outcomes. It handles navigation as well as extraction, but costs money and requires a small amount of programming/tokenization skills.

    Winautomation seems cool, but it’s only available for Windows, which was a dead end for me.

So that’s it? Nothing works?

Not quite. None of these tools solved the problem I had on a very challenging website: the site clearly didn’t want to be crawled given the CAPTCHA, and the javascript-submitted POST requests threw most of the tools that expected navigation through links for a loop. Still, most of the tools I reviewed have snazzy demos, and I was able to use some of them for extracting content from sites that were less challenging than the one I initially intended to scrape.

All hope is not lost, however. Where pure automation fails, a human can step in. Several proposals suggested paying people on oDesk, Mechanical Turk, or CrowdFlower to extract the content with a human touch. This would certainly get us past the CAPTCHA and hard-to-automate navigation. It might get pretty expensive to have humans copy/paste the data for extraction, however. Given that the tools above are good at extracting content from any single page, I suspect there’s room for a human-in-the-loop scraping tool to steal the show: humans can navigate and train the extraction step, and the machine can perform the extraction. I suspect that’s what import.io is up to, and I’m hopeful they keep the tool available to folks like the ones I initially tried to help.

While we’re on the topic of human-powered solutions, it might make sense to hire a developer on oDesk to just implement the scraper for the site this organization was looking at. While a lot of the developer-free tools I mentioned above look promising, there are clearly cases where paying someone for a few hours of script-building just makes sense.

Source: http://blog.marcua.net/post/74655674340

NHL ending dry scraping of ice before overtime

TORONTO (AP) — The NHL will no longer dry scrape the ice before overtime.

Instituted this season in an effort to reduce the number of shootouts, the dry scraping will stop after Friday's games.

The general managers decided at their meeting Tuesday to make the change after the league talked to the players' union the past few days.

Beginning Saturday, ice crews around the league will again shovel the ice after regulation as they did in previous years. The GMs said the dry scrape was causing too much of a delay. Director of hockey operations Colin Campbell said the delays were lasting from more than four minutes to almost seven.

The dry scrape initially had been approved in hopes of reducing shootouts by improving scoring chances without unduly slowing play by recoating the ice.

The GMs also discussed expanded video review, including goaltender interference, and the possibility of three-on-three overtime. The American Hockey League is experimenting with the three-on-three format this season.

This annual meeting the day after the Hockey Hall of Fame induction usually doesn't produce actual changes, with the dry scrape providing an exception.

The main purpose is to set up the March meeting in Boca Raton, Florida, where these items will be further addressed.

Source:http://missoulian.com/sports/hockey/nhl-ending-dry-scraping-of-ice-before-overtime/article_3dd5473c-6102-5800-99f7-2c98be0f99ad.html

Is Web Scraping Legal?

Web scraping might be one of the best ways to aggregate content from across the internet, but it comes with a caveat: It’s also one of the hardest tools to parse from a legal standpoint.

For the uninitiated, web scraping is a process whereby an automated piece of software extracts data from a website by “scraping” through the site’s many pages. While search engines like Google and Bing do a similar task when they index web pages, scraping engines take the process a step further and convert the information into a format which can be easily transferred over to a database or spreadsheet.

It’s also important to note that a web scraper is not the same as an API. While a company might provide an API to allow other systems to interact with its data, the quality and quantity of data available through APIs is typically lower than what is made available through web scraping. In addition, web scrapers provide more up-to-date information than APIs and are much easier to customize from a structural standpoint.

The applications of this “scraped” information are widespread. A journalist like Nate Silver might use scrapers to monitor baseball statistics and create numerical evidence for a new sports story he’s working on. Similarly, an eCommerce business might bulk scrape product titles, prices, and SKUs from other sites in order to further analyze them.

Legality of Web ScrapingWhile web scraping is an undoubtedly powerful tool, it’s still undergoing growing pains when it comes to legal matters. Because the scraping process appropriates pre-existing content from across the web, there are all kinds of ethical and legal quandaries that confront businesses who hope to do leverage scrapers for their own processes.

In this “wild west” environment, where the legal implications of web scraping are in a constant state of flux, it helps to get a foothold on where the legal needle currently falls. The following timeline outlines some of the biggest cases involving web scrapers in the United States, and allows us to achieve a greater understanding on the precedents that surround the court rulings.

Terms of Use Tug-of-War—2000-2009

For years after they first came into use, web scrapers went largely unchallenged from a legal standpoint. In 2000, however, the use of scrapers came under heavy and consistent fire when eBay fired the first shot against an auction data aggregator called Bidder’s Edge. In this very early case, eBay argued that Bidder’s Edge was using scrapers in a way that violated Trespass to Chattels doctrine. While the lawsuit was settled out of court, the judge upheld eBay’s original injunction, stating that heavy bot traffic could very well disrupt eBay’s service.

Then in 2003’s Intel Corp. v. Hamidi, the California Supreme court overturned the basis of eBay v. Bidder’s Edge, ruling that Trespass to Chattels could not extend to the context of computers if no actual damage to personal property occurred.

So in terms of legal action against web scraping, Tresspass to Chattels no longer applied, and things were back to square one. This began a period in which the courts consistently rejected Terms of Service as a valid means of prohibiting scrapers, including cases like Perfect 10 v. Google, and Cvent v. Eventbrite.

The Takeaway: The earliest cases against scrapers hinged on Trespass to Chattels law, and were successful. However, that doctrine is no longer a valid approach.

Facebook Web Scraping2009—Facebook Steps In

In 2009, Facebook turned the tides of the web scraping war when Power.com, a site which aggregated multiple social networks into one centralized site, included Facebook in their service. Because Power.com was scraping Facebook’s content instead of adhering to their established standards, Facebook sued Power on grounds of copyright infringement.

In denying Power.com’s motion to dismiss the case, the Judge ruled that scraping can constitute copying, however momentary that copying may be. And because Facebook’s Terms of Service don’t allow for scraping, that act of copying constituted an infringement on Facebook’s copyright. With this decision, the waters regarding the legality of web scrapers began to shift in favor of the content creators.

The Takeaway: Even if a web scraper ignores infringing content on its way to freely-usable content, it might qualify as copyright infringement by virtue of having technically “copied” the infringing content first.

2011-2014— U.S. v Auernheimer

In 2010, hacker Andrew “Weev” Auernheimer found a security flaw in AT&T’s website, which would display the email addresses of users who visited the site via their iPads. By exploiting the flaw using some simple scripts and a scraper, Auernheimer was able to gather thousands of emails from the AT&T site.

Although these email addresses were publicly available, Auernheimer’s exploit led to his 2012 conviction, where he was charged with identity fraud and conspiracy to access a computer without authorization.

Data ScrapingEarlier this year, the court vacated Auernheimer’s conviction, ruling that the trial’s New Jersey venue was improper. But even though the case turned out to be mostly inconclusive, the court noted the fact that there was no evidence to show that “any password gate or code-based barrier was breached.” This seems to leave room for the web scraping of publicly-available personal information, although it’s still very much open to interpretation and not set in stone.

The Takeaway: Using a web scraper to aggregate sensitive personal information can lead to a conviction, even if that information was technically available to the public. While there is hope in the court’s observation that no passwords or barriers were broken to retrieve this information, the waters here are still very volatile.

2013—Associated Press vs. Meltwater

Meltwater is a software company whose “Global Media Monitoring” product uses scrapers to aggregate news stories for paying clients. The Associated Press took issue with Meltwater’s scraping of their original stories, some of which had been copyrighted. In 2012, AP filed suit against Meltwater for copy infringement and hot news misappropriation.

While it’s already been established that facts cannot be copyrighted, the court decided that the AP’s copyrighted articles—and more specifically, the way in which the facts within those articles were arranged—were not fair game for copying. On top of this, Meltwater’s use of the articles failed to meet the established fair use standards, and could not be defended on that front either.

The Takeaway: Fair use is limited when it comes to web scrapers, and copyrighted content is not always open to be scraped.

~~

By closely observing the outcomes of previous rulings, you’ll find that there are a few guidelines that a scraper should attempt to adhere to:

    Content being scraped is not copyright protected
    The act of scraping does not burden the services of the site being scraped
    The scraper does not violate the Terms of Use of the site being scraped
    The scraper does not gather sensitive user information
    The scraped content adheres to fair use standards

While all of these guidelines are important to understand before using scrapers, there are other ways to acclimate to the legal nuances. In many cases, you’ll find that a simple conversation with a business software developer or consultant will lead to some satisfying conclusions: Odds are, they’ve used scrapers in the past and can shed light on any snags they’ve hit in the process. And of course, talking with a lawyer is always an ideal course of action when treading into questionable legal territory.

Source:http://blog.icreon.us/2014/09/12/web-scraping-and-you-a-legal-primer-for-one-of-its-most-useful-tools/

Example of Scraping with Selenium WebDriver in C#

In this article I will show you how it is easy to scrape a web site using Selenium WebDriver. I will guide you through a sample project which is written in C# and uses WebDriver in conjunction with the Chrome browser to login on the testing page and scrape the text from the private area of the website.

Downloading the WebDriver

First of all we need to get the latest version of Selenium Client & WebDriver Language Bindings and the Chrome Driver. Of course, you can download WebDriver bindings for any language (Java, C#, Python, Ruby), but within the scope of this sample project I will use the C# binding only. In the same manner, you can use any browser driver, but here I will use Chrome.

After downloading the libraries and the browser driver we need to include them in our Visual

Studio solution:

VS Solution

Creating the scraping program

In order to use the WebDriver in our program we need to add its namespaces:

using OpenQA.Selenium;
using OpenQA.Selenium.Chrome;
using OpenQA.Selenium.Support.UI;

Then, in the main function, we need to initialize the Chrome Driver:

using (var driver = new ChromeDriver())

{

 This piece of code searches for the chromedriver.exe file. If this file is located in a directory different from the directory where our program is executed, then we need to specify explicitly its path in the ChromeDriver constructor.

When an instance of ChromeDriver is created, a new Chrome browser will be started. Now we can control this browser via the driver variable. Let’s navigate to the target URL first:

driver.Navigate().GoToUrl("http://testing-ground.scraping.pro/login");

Then we can find the web page elements needed for us to login in the private area of the website:

var userNameField = driver.FindElementById("usr");
var userPasswordField = driver.FindElementById("pwd");
var loginButton = driver.FindElementByXPath("//input[@value='Login']");

Here we search for user name and password fields and the login button and put them into the corresponding variables. After we have found them, we can type in the user name and the password  and press the login button:

userNameField.SendKeys("admin");
userPasswordField.SendKeys("12345");
loginButton.Click();

At this point the new page will be loaded into the browser, and after it’s done we can scrape the text we need and save it into the file:

var result = driver.FindElementByXPath("//div[@id='case_login']/h3").Text;

File.WriteAllText("result.txt", result);

That’s it! At the end, I’d like to give you a bonus – saving a screenshot of the current page into a

file:

driver.GetScreenshot().SaveAsFile(@"screen.png", ImageFormat.Png);

The complete program listing

using System.IO;
using System.Text;
using OpenQA.Selenium;
using OpenQA.Selenium.Chrome;
using OpenQA.Selenium.Support.UI;

namespace WebDriverTest
{
    class Program
    {
        static void Main(string[] args)
        {
            // Initialize the Chrome Driver
            using (var driver = new ChromeDriver())
            {
                // Go to the home page
                driver.Navigate().GoToUrl("http://testing-ground.scraping.pro/login");

                // Get the page elements
                var userNameField = driver.FindElementById("usr");
                var userPasswordField = driver.FindElementById("pwd");
                var loginButton = driver.FindElementByXPath("//input[@value='Login']");

                // Type user name and password
                userNameField.SendKeys("admin");
                userPasswordField.SendKeys("12345");

                // and click the login button
                loginButton.Click();

                // Extract the text and save it into result.txt
                var result = driver.FindElementByXPath("//div[@id='case_login']/h3").Text;
                File.WriteAllText("result.txt", result);

                // Take a screenshot and save it into screen.png
                driver.GetScreenshot().SaveAsFile(@"screen.png", ImageFormat.Png);
            }
        }
    }
}

Also you can download a ready project here.

Conclusion

I hope you are impressed with how easy it is to scrape web pages using the WebDriver. You can naturally press keys and click buttons as you would in working with the browser. You don’t even need to understand what kind of HTTP requests are sent and what cookies are stored; the browser does all this for you. This makes the WebDriver a wonderful tool in the hands of a web scraping specialist.

Source:http://scraping.pro/example-of-scraping-with-selenium-webdriver-in-csharp/

Application of Web Data Mining in CRM

The process of improvising the customer relations and interactions and making them more amicable may be termed as Customer relationship management (CRM). Since web data mining is used in the utilization of the various modeling and data analysis methods in detecting given patterns and relationships in the data, it can be used as an effective tool in CRM. By the effectively using web data mining you are able to understand what your customers what.

It is important to note that web data mining can be used effectively in searching for the right and potential customers to be offered the right products at the right time. The result of this in any business is the increase in the revenue generated. This is made possible as you are able to respond to each customer in an effective and efficient way. The method further utilizes very few resources and can be therefore termed as an economical method.

In the next paragraphs we discuss the basic process of customer relationship management and its integration with web data mining service. The following are the basic process that should be used in understanding what your customers need, sending them the right offers and products, and reducing the resources used in managing your customers.

Defining the business objective. Web data mining can be used to define and inform your customers your business objective. By doing research you can be able to determine whether your business objective is communicated well to your customers and clients. Does your business objective take interest in the customers? Your business goal must be clearly outlined in your business CRM. By having a more precise and defined goal is the possible way of ensuring success in the customer relationship management.

Source:http://www.loginworks.com/blogs/web-scraping-blogs/application-web-data-mining-crm/

Scraping webdata from a website that loads data in a streaming fashion

I'm trying to scrape some data off of the FEC.gov website using python for a project of mine. Normally I use python

mechanize and beautifulsoup to do the scraping.

I've been able to figure out most of the issues but can't seem to get around a problem. It seems like the data is

streamed into the table and mechanize.Browser() just stops listening.

So here's the issue: If you visit http://query.nictusa.com/cgi-bin/can_ind/2011_P80003338/1/A ... you get the first 500

contributors whose last name starts with A and have given money to candidate P80003338 ... however, if you use

browser.open() at that url all you get is the first ~5 rows.

I'm guessing its because mechanize isn't letting the page fully load before the .read() is executed. I tried putting a

time.sleep(10) between the .open() and .read() but that didn't make much difference.

And I checked, there's no javascript or AJAX in the website (or at least none are visible when you use the 'view-

source'). SO I don't think its a javascript issue.

Any thoughts or suggestions? I could use selenium or something similar but that's something that I'm trying to avoid.

-Will

2 Answers

Why not use an html parser like lxml with xpath expressions.

I tried

>>> import lxml.html as lh
>>> data = lh.parse('http://query.nictusa.com/cgi-bin/can_ind/2011_P80003338/1/A')
>>> name = data.xpath('/html/body/table[2]/tr[5]/td[1]/a/text()')
>>> name
[' AABY, TRYGVE']
>>> name = data.xpath('//table[2]/*/td[1]/a/text()')
>>> len(name)
500
>>> name[499]
' AHMED, ASHFAQ'
>>>



Similarly, you can create xpath expression of your choice to work with.


Source: http://stackoverflow.com/questions/9435512/scraping-webdata-from-a-website-that-loads-data-in-a-streaming-

fashion

How can I circumvent page view limits when scraping web data using Python?

I am using Python to scrape US postal code population data from http:/www.city-data.com, through this directory: http://www.city-data.com/zipDir.html. The specific pages I am trying to scrape are individual postal code pages with URLs like this: http://www.city-data.com/zips/01001.html. All of the individual zip code pages I need to access have this same URL Format, so my script simply does the following for postal_code in range:

    Creates URL given postal code
    Tries to get response from URL
    If (2), Check the HTTP of that URL
    If HTTP is 200, retrieves the HTML and scrapes the data into a list
    If HTTP is not 200, pass and count error (not a valid postal code/URL)
    If no response from URL because of error, pass that postal code and count error
    At end of script, print counter variables and timestamp

The problem is that I run the script and it works fine for ~500 postal codes, then suddenly stops working and returns repeated timeout errors. My suspicion is that the site's server is limiting the page views coming from my IP address, preventing me from completing the amount of scraping that I need to do (all 100,000 potential postal codes).

My question is as follows: Is there a way to confuse the site's server, for example using a proxy of some kind, so that it will not limit my page views and I can scrape all of the data I need?

Thanks for the help! Here is the code:

##POSTAL CODE POPULATION SCRAPER##

import requests

import re

import datetime

def zip_population_scrape():

    """
    This script will scrape population data for postal codes in range
    from city-data.com.
    """
    postal_code_data = [['zip','population']] #list for storing scraped data

    #Counters for keeping track:
    total_scraped = 0
    total_invalid = 0
    errors = 0


    for postal_code in range(1001,5000):

        #This if statement is necessary because the postal code can't start
        #with 0 in order for the for statement to interate successfully
        if postal_code <10000:
            postal_code_string = str(0)+str(postal_code)
        else:
            postal_code_string = str(postal_code)

        #all postal code URLs have the same format on this site
        url = 'http://www.city-data.com/zips/' + postal_code_string + '.html'

        #try to get current URL
        try:
            response = requests.get(url, timeout = 5)
            http = response.status_code

            #print current for logging purposes
            print url +" - HTTP:  " + str(http)

            #if valid webpage:
            if http == 200:

                #save html as text
                html = response.text

                #extra print statement for status updates
                print "HTML ready"

                #try to find two substrings in HTML text
                #add the substring in between them to list w/ postal code
                try:           

                    found = re.search('population in 2011:</b> (.*)<br>', html).group(1)

                    #add to # scraped counter
                    total_scraped +=1

                    postal_code_data.append([postal_code_string,found])

                    #print statement for logging
                    print postal_code_string + ": " + str(found) + ". Data scrape successful. " + str(total_scraped) + " total zips scraped."
                #if substrings not found, try searching for others
                #and doing the same as above   
                except AttributeError:
                    found = re.search('population in 2010:</b> (.*)<br>', html).group(1)

                    total_scraped +=1

                    postal_code_data.append([postal_code_string,found])
                    print postal_code_string + ": " + str(found) + ". Data scrape successful. " + str(total_scraped) + " total zips scraped."

            #if http =404, zip is not valid. Add to counter and print log        
            elif http == 404:
                total_invalid +=1

                print postal_code_string + ": Not a valid zip code. " + str(total_invalid) + " total invalid zips."

            #other http codes: add to error counter and print log
            else:
                errors +=1

                print postal_code_string + ": HTTP Code Error. " + str(errors) + " total errors."

        #if get url fails by connnection error, add to error count & pass
        except requests.exceptions.ConnectionError:
            errors +=1
            print postal_code_string + ": Connection Error. " + str(errors) + " total errors."
            pass

        #if get url fails by timeout error, add to error count & pass
        except requests.exceptions.Timeout:
            errors +=1
            print postal_code_string + ": Timeout Error. " + str(errors) + " total errors."
            pass


    #print final log/counter data, along with timestamp finished
    now= datetime.datetime.now()
    print now.strftime("%Y-%m-%d %H:%M")
    print str(total_scraped) + " total zips scraped."
    print str(total_invalid) + " total unavailable zips."
    print str(errors) + " total errors."



Source: http://stackoverflow.com/questions/25452798/how-can-i-circumvent-page-view-limits-when-scraping-web-data-using-python

Web data scraping (online news comments) with Scrapy (Python)

Since you seem like the try-first ask-question later type (that's a very good thing), I won't give you an answer, but a

(very detailed) guide on how to find the answer.

The thing is, unless you are a yahoo developer, you probably don't have access to the source code you're trying to

scrape. That is to say, you don't know exactly how the site is built and how your requests to it as a user are being

processed on the server-side. You can, however, investigate the client-side and try to emulate it. I like using Chrome

Developer Tools for this, but you can use others such as FF firebug.

So first off we need to figure out what's going on. So the way it works, is you click on the 'show comments' it loads

the first ten, then you need to keep clicking for the next ten comments each time. Notice, however, that all this

clicking isn't taking you to a different link, but lively fetches the comments, which is a very neat UI but for our

case requires a bit more work. I can tell two things right away:

    They're using javascript to load the comments (because I'm staying on the same page).
    They load them dynamically with AJAX calls each time you click (meaning instead of loading the comments with the

page and just showing them to you, with each click it does another request to the database).

Now let's right-click and inspect element on that button. It's actually just a simple span with text:

<span>View Comments (2077)</span>

By looking at that we still don't know how that's generated or what it does when clicked. Fine. Now, keeping the

devtools window open, let's click on it. This opened up the first ten. But in fact, a request was being made for us to

fetch them. A request that chrome devtools recorded. We look in the network tab of the devtools and see a lot of

confusing data. Wait, here's one that makes sense:

http://news.yahoo.com/_xhr/contentcomments/get_comments/?content_id=42f7f6e0-7bae-33d3-aa1d-

3dfc7fb5cdfc&_device=full&count=10&sortBy=highestRated&isNext=true&offset=20&pageNumber=2&_media.modules.content_commen

ts.switches._enable_view_others=1&_media.modules.content_comments.switches._enable_mutecommenter=1&enable_collapsed_com

ment=1

See? _xhr and then get_comments. That makes a lot of sense. Going to that link in the browser gave me a JSON object

(looks like a python dictionary) containing all the ten comments which that request fetched. Now that's the request you

need to emulate, because that's the one that gives you what you want. First let's translate this to some normal reqest

that a human can read:

go to this url: http://news.yahoo.com/_xhr/contentcomments/get_comments/
include these parameters: {'_device': 'full',
          '_media.modules.content_comments.switches._enable_mutecommenter': '1',
          '_media.modules.content_comments.switches._enable_view_others': '1',
          'content_id': '42f7f6e0-7bae-33d3-aa1d-3dfc7fb5cdfc',
          'count': '10',
          'enable_collapsed_comment': '1',
          'isNext': 'true',
          'offset': '20',
          'pageNumber': '2',
          'sortBy': 'highestRated'}

Now it's just a matter of trial-and-error. However, a few things to note here:

    Obviously the count is what decides how many comments you're getting. I tried changing it to 100 to see what

happens and got a bad request. And it was nice enough to tell me why - "Offset should be multiple of total rows". So

now we understand how to use offset

    The content_id is probably something that identifies the article you are reading. Meaning you need to fetch that

from the original page somehow. Try digging around a little, you'll find it.

    Also, you obviously don't want to fetch 10 comments at a time, so it's probably a good idea to find a way to fetch

the number of total comments somehow (either find out how the page gets it, or just fetch it from within the article

itself)

    Using the devtools you have access to all client-side scripts. So by digging you can find that that link to

/get_comments/ is kept within a javascript object named YUI. You can then try to understand how it is making the

request, and try to emulate that (though you can probably figure it out yourself)

    You might need to overcome some security measures. For example, you might need a session-key from the original

article before you can access the comments. This is used to prevent direct access to some parts of the sites. I won't

trouble you with the details, because it doesn't seem like a problem in this case, but you do need to be aware of it in

case it shows up.

    Finally, you'll have to parse the JSON object (python has excellent built-in tools for that) and then parse the

html comments you are getting (for which you might want to check out BeautifulSoup).

As you can see, this will require some work, but despite all I've written, it's not an extremely complicated task

either.

So don't panic.

It's just a matter of digging and digging until you find gold (also, having some basic WEB knowledge doesn't hurt).

Then, if you face a roadblock and really can't go any further, come back here to SO, and ask again. Someone will help

you.


Source: http://stackoverflow.com/questions/20218855/web-data-scraping-online-news-comments-with-scrapy-python

A good web data extraction/screen scraper program?

I need to capture product data from a site on a regular basis and wondered if any one knows of a good software program? I've trialed Mozenda but its a monthly subscription and pricey in the long term. Obviously something thats free would be best but I don't mind paying either. Just need a decent program thats reliable and doesn't require much programming knowledge.

You can try ScraperWiki.com if you know python.

I've experimented with Screen-Scraper and found it easy to use. The application comes in multiple versions: basic (which is free), professional, and enterprise. Also, multiple platforms are supported.

Hire a programmer to do it so that there is only a one off cost. I often see similar projects on freelancing websites like Elance and oDesk.

I really like iMacros. You can give it a test drive to see if it meets your needs with the totally free Firefox extension (there's also IE versions), but there are also more full featured application and "server" versions that have more features and ability to do thing in an unattended manner.

Here are some other alternatives to consider:

    License the data from the provider. Call em up and ask 'em.

    Use Amazon Mechanical Turk to get humans to copy and paste and format it for ya. They are cheap.

    For automation, it depends on how complicated the HTML is and how often it changes. You could use Excel's Web Data Import if it's really simple.


You can use irobot from IRobotSoft, which is totally free, and provides more functionalityies than other paid software. Watch demos here http://irobotsoft.com/help/ for how simple it is.

Questions on their forum were answered very quickly.

Source: http://stackoverflow.com/questions/2334164/a-good-web-data-extraction-screen-scraper-program

How to login to website and extract data using PHP [closed]

I have installed the tiny tiny rss on to my computer (Windows) and also have Xampp installed (localhost).

I want to be able to use PHP to extract data from the Tiny tiny RSS webpage.

I have tried this it which just opens the front page:

<?php
$homepage = file_get_contents('my install tiny tiny rss url');
echo $homepage;
?>

But how do I login and extract the data.

You can use cURL to send post data and headers. To login you need to replicate the exact data exchange between the client and the server.


SOurce: http://stackoverflow.com/questions/20611918/how-to-login-to-website-and-extract-data-using-php

Is it ok to scrape data from Google results?

I'd like to fetch results from Google using curl to detect potential duplicate content. Is there a high risk of being banned by Google?

Google will eventually block your IP when you exceed a certain amount of requests.



Google disallows automated access in their TOS, so if you accept their terms you would break them.

That said, I know of no lawsuit from Google against a scraper. Even Microsoft scraped Google, they powered their search engine Bing with it. They got caught in 2011 red handed :)

There are two options to scrape Google results:

1) Use their API

    You can issue around 40 requests per hour You are limited to what they give you, it's not really useful if you want to track ranking positions or what a real user would see. That's something you are not allowed to gather.

    If you want a higher amount of API requests you need to pay.
    60 requests per hour cost 2000 USD per year, more queries require a custom deal.

2) Scrape the normal result pages

    Here comes the tricky part. It is possible to scrape the normal result pages. Google does not allow it.
    If you scrape at a rate higher than 15 keyword requests per hour you risk detection, higher than 20/h will get you blocked from my experience.
    By using multiple IPs you can up the rate, so with 100 IP addresses you can scrape up to 2000 requests per hour. (50k a day)
    There is an open source search engine scraper written in PHP at http://scraping.compunect.com It allows to reliable scrape Google, parses the results properly and manages IP addresses, delays, etc. So if you can use PHP it's a nice kickstart, otherwise the code will still be useful to learn how it is done.


Source: http://stackoverflow.com/questions/22657548/is-it-ok-to-scrape-data-from-google-results

Excel VBA Data Mining Real-Time Data from a Web Page that Refreshes Data

I want to capture real-time data that updates into a table on a webpage; I prefer capturing it into excel using VBA, but I will write it in .NET C# or VB if I that is easier.

the data updates about 1 or 2 seconds, and I want to just grab the latest data quotes and log it into my spreadsheet; the table names are the same, only the data refreshes, and it does so automatically on the web page.

I've done a lot of Excel VBA and I know how to download a URL to a file--this is NOT what I want; I want to gain access to my webpage that is active and grab the data updates after I've logged into my site and selected a webpage that I like.

Is there a simple way to access this data on the webpage from Excel or .Net? Because it refreshes no more than once every 1 or 2 seconds, it is easy to just keep checking it for updates, and I can compare the latest data to see if it actually refreshed.


In Excel 2003, use Data/Import External Data/New Web Query
Browse to your page and select the table you want to import.
After that you can either do a manual Refresh, or use a timer procedure to do something like:

Source: http://stackoverflow.com/questions/9855794/excel-vba-data-mining-real-time-data-from-a-web-page-that-refreshes-data

Need to pull data from a website…web query? macro?

I have a list of every DOT # (Dept. of Trans.) in the country. I want to find out insurance effective date for each one of these companies. If you go to http://li-public.fmcsa.dot.gov --> "continue" --> then from the dropdown select "carrier search" and hit "go" it'll take you to a search form (that is the only way to get to this screen).

From there, you can input a DOT # X (use 61222 as an example) and it'll bring you to another screen. Click "view report in HTML" and then down on the bottom you'll see "Active/Pending Insurance". I want to pull the "effective date" from that page and stick it in the spreadsheet next to the DOT # X that I already know.

Of the thousands of DOT #'s in my list, not all will have filings on this website, if that makes a difference.

Can this be done with a Macro or Excel Web Query? I know I probably sound like a total novice, but I'd appreciate any help I could get.

Can you do it? Frankly even if you could you'd lock up the spreadsheet while it's doing that processing. And in the end, how would you handle an error half-way through?

I'd not do this in a client-facing application. This sounds more like something to do in server-side app that can do the processing and gather the information in a more controlled environment. Then you Excel spreadsheet could query that app and get the information in one fell swoop. Error handling is much simpler and you don't end up sitting there staring at Excel why it works its way through thousands of web sites. It was not built to do that elegantly.

What do you write the web service I'm describing in? Well it depends on your preference. Me, I'd write it in Ruby on Rails since it can easily handle the scraping aspect of the task and can report the data out easily as well. But it really falls back to whatever you're most comfortable coding in.


Source: http://stackoverflow.com/questions/15286429/need-to-pull-data-from-a-website-web-query-macro

How to extract data from web 2.0 graphs using a scraper

I have recently come across a web page containing a graph object that displays the (x, y) values on the object as the

mouse is rolled across it. Is there any way to automate the extraction of this data?

How is the graph data loaded? If embedded in the page source then you can extract it with xpath or regex. Else use

Firebug to see how it is loaded.



You will need a solution that works inside the web browser, so the AJAX/Javascript is properly rendered.

I have used iMacros with good success for web scraping in the past. There are free/open-source and "PRO" paid editions

(comparison table here).

Another option is always to custom code something with the Microsoft webbrowser control.


Source: http://stackoverflow.com/questions/3980774/how-to-extract-data-from-web-2-0-graphs-using-a-scraper

Legality of Web Scraping vs Normal Use

I know the topic of web scraping has been discussed before (example), and I understand it's a bit of a grey area

depending on a lot of factors (e.g. website's terms of use).

What I'd like to ask is: how is web scraping any different from (a) how we access the webpage via a web browser, and

(b) how web crawlers (e.g. Google) download and index webpages?

Without knowing the legal background, I can't help but think that they're all just HTTP requests. If web scraping is

illegal, then so should crawling and indexing (for instance be illegal).

Of course if your program is hitting the server so hard that it causes a denial of service, it's a different story

altogether... my point is simply accessing and using data that is already open to the public.



I know this is a dead thread, but it would be nice to place some legal implications here due to its ranking in my

Google Search. I cannot help but figure I am not the only one who searches like I do.

Legally, in the US, there are a few factors that seem to be important.

    Are you doing anything that is akin to hacking or gaining unauthorized access via the Computer Fraud and Abuse Act.

Exploiting vulnerabilities and passing SQL in the URL to open a database no matter how bad the idiot programming like

that was is illegal with a 15 year sentence (see the cases where an individual exploited security vulnerabilities in

Verizon). Also, add a time out even if you round robin or use proxies. DDoS attacks are attacks. 1000 requests per

second can shut down a lot of servers providing public information. The result here is up to 15 years in jail.

    Copyright Law: As mentioned, pure replication of data is illegal. Even 4% replication has been deemed a breach.

With the recent gutting of the DMCA, a person is even more vulnerable to civil and criminal penalties.

    Trespass and Chattels: The following from wikipedia says it all.

    U.S. courts have acknowledged that users of "scrapers" or "robots" may be held liable for committing trespass to

chattels,[5][6] which involves a computer system itself being considered personal property upon which the user of a

scraper is trespassing. The best known of these cases, eBay v. Bidder's Edge, resulted in an injunction ordering

Bidder's Edge to stop accessing, collecting, and indexing auctions from the eBay web site.

    Paywalls and Product: When going behind paywalls and breaching contract by clicking an agreement not to do

something and then doing it, you add fuel to the protection of negligence v. willingness [an issue for damages and

penalties not guilt] in civil and any criminal trials. (sorry originally wanted to say ignorance but it really isn't a

defense)

    International: EU law and other law is way more lax. Corporations with big budgets dominate our legal landscape.

They control the system in a very real way with their $$$.

Basically, get public information and information that is available without going behind a pay wall. Think like a user

of the internet and combine a bunch of sources into a unique product. Don't just 'steal' an entire site (it isn't

really stealing if it is a government site that offers public data especially for download but is if you download all

or even more than a couple of the listings on ebay). Read the terms and conditions to know who actually owns the

content.

Here are a few examples. Trulia owns its information but you could use it to go to an agents website and collect a

legal amount of information. The legal amount is determinable. However, a public MLS listing lookup site with no

agreement or terms and offering data to the public is fair game. The MLS numbers lists, however, are normally not fair

game.

If a researcher can get to data, so can you. If a researcher needs permission, so do you. A computer is like having a

million corporate researchers at your disposal.

AS for company policy, it is usually used internally to shield from liability and serves as a warning but is not

entirely enforceable. The legal parts letting you know about copyrights and such are and usually are supposed to be

known by everyone. Complete ignorance is not a legal protection. It does provide a ground set of rules. Be nice, or get

banned is that message as far as I know.

My personal strategy is to start with public data and embellish it within legal means.


Source: http://stackoverflow.com/questions/14735791/legality-of-web-scraping-vs-normal-use

Anyone knows an online tool that can scrape a page and create a REST API for the scraped data?

I'm looking for a SaaS solution that is able to login to a platform, scrape data (reports) and then allow accessing the

data through an API. I have some reporting platforms that provide web reporting and email reporting but with no API.

Online reporting doesn't help and email reporting, although can be automated and scraped, isn't so reliable.

If you are willing to do the scraping through your own connection, have a look at Import IO. They have a desktop

application that you use to teach the system how to scrape a page, and then you run the crawler from that application -

and you can run it for as long as you like, as far as I can tell.

You may then upload your data to the Import cloud, from where it is available via an API on the import.io servers.

Useful data can be made public to donate it "to the commons" if you wish.


I did some more digging, found iMacros as a possible solution. Its Windows based, which is a drawback in my case, but

it does allow automation of the scraping and afterwards interaction via common web scripting languages like PHP and

ASP.net.


If you are familiar with jQuery, I think you can use node.js and Cheerio module, then you can create a simple

application to do auto scraping. Actually I have already built a site to do on line web scraping based on the above

mentioned tech, the site is www.datafiddle.net, you can take a look at it.


Source: http://stackoverflow.com/questions/19646028/anyone-knows-an-online-tool-that-can-scrape-a-page-and-create-a-

rest-api-for-the

Extract data from Web Scraping C#

I am MVC ASP.NET developer.

I have received the contents from any url, i.e. http, https etc. using WebRequest class.

I have received all the content of that particular url. (for now I took http://google.com)

My next step is to extract buttons, header, footer, colors, text etc.

Here is my code for now:

public ActionResult GetContent(UrlModel model) //model having a string URL
which is entered in a text box and method hits using submit button.
{
    //WebRequest request = WebRequest.Create(model.URL);

    WebRequest request = WebRequest.Create(model.URL);

    request.Credentials = CredentialCache.DefaultCredentials;

    WebResponse response = request.GetResponse();

    Stream dataStream = response.GetResponseStream();

    StreamReader reader = new StreamReader(dataStream);

    string responseFromServer = reader.ReadToEnd();
    ViewBag.Response = responseFromServer;

    reader.Close();
    response.Close();
    return View();
}

Can someone help me with writing the code ?

Also do suggest me with some techniques of data extraction in C#.



Source: http://stackoverflow.com/questions/21901162/extract-data-from-web-scraping-c-sharp

Scrapy, scraping price data from StubHub

I've been having a difficult time with this one.

I want to scrape all the prices listed for this Bruno Mars concert at the Hollywood Bowl so I can get the average price.

http://www.stubhub.com/bruno-mars-tickets/bruno-mars-hollywood-hollywood-bowl-31-5-2014-4449604/

I've located the prices in the HTML and the xpath is pretty straightforward but I cannot get any values to return.

I think it has something to do with the content being generated via javascript or ajax but I can't figure out how to send the correct request to get the code to work.

Here's what I have:

from scrapy.spider import BaseSpider
from scrapy.selector import Selector

from deeptix.items import DeeptixItem

class TicketSpider(BaseSpider):
    name = "deeptix"
    allowed_domains = ["stubhub.com"]
    start_urls = ["http://www.stubhub.com/bruno-mars-tickets/bruno-mars-hollywood-hollywood-bowl-31-5-2014-4449604/"]

def parse(self, response):
    sel = Selector(response)
    sites = sel.xpath('//div[contains(@class, "q_cont")]')
    items = []
    for site in sites:
        item = DeeptixItem()
        item['price'] = site.xpath('span[contains(@class, "q")]/text()').extract()
        items.append(item)
    return items

Any help would be greatly appreciated I've been struggling with this one for quite some time now. Thank you in advance!


Source: http://stackoverflow.com/questions/22770917/scrapy-scraping-price-data-from-stubhub

How do you scrape AJAX pages?

Overview:

All screen scraping first requires manual review of the page you want to extract resources from. When dealing with AJAX you usually just need to analyze a bit more than just simply the HTML.

When dealing with AJAX this just means that the value you want is not in the initial HTML document that you requested, but that javascript will be exectued which asks the server for the extra information you want.

You can therefore usually simply analyze the javascript and see which request the javascript makes and just call this URL instead from the start.

Example:

Take this as an example, assume the page you want to scrape from has the following script:

<script type="text/javascript">
function ajaxFunction()
{
var xmlHttp;
try
  {
  // Firefox, Opera 8.0+, Safari
  xmlHttp=new XMLHttpRequest();
  }
catch (e)
  {
  // Internet Explorer
  try
    {
    xmlHttp=new ActiveXObject("Msxml2.XMLHTTP");
    }
  catch (e)
    {
    try
      {
      xmlHttp=new ActiveXObject("Microsoft.XMLHTTP");
      }
    catch (e)
      {
      alert("Your browser does not support AJAX!");
      return false;
      }
    }
  }
  xmlHttp.onreadystatechange=function()
    {
    if(xmlHttp.readyState==4)
      {
      document.myForm.time.value=xmlHttp.responseText;
      }
    }
  xmlHttp.open("GET","time.asp",true);
  xmlHttp.send(null);
  }
</script>

Then all you need to do is instead do an HTTP request to time.asp of the same server instead. Example from w3schools.


Sporce: http://stackoverflow.com/questions/260540/how-do-you-scrape-ajax-pages

using Perl to scrape a website

I am interested in writing a perl script that goes to the following link and extracts the number 1975: https://familysearch.org/search/collection/results#count=20&query=%2Bevent_place_level_1%3ACalifornia%20%2Bevent_place_level_2%3A%22San%20Diego%22%20%2Bbirth_year%3A1923-1923~%20%2Bgender%3AM%20%2Brace%3AWhite&collection_id=2000219

That website is the amount of white men born in the year 1923 who live in San Diego County, California in 1940. I am trying to do this in a loop structure to generalize over multiple counties and birth years.

In the file, locations.txt, I put the list of counties, such as San Diego County.

The current code runs, but instead of the # 1975, it displays unknown. The number 1975 should be in $val\n.

I would very much appreciate any help!

#!/usr/bin/perl

use strict;

use LWP::Simple;

open(L, "locations26.txt");

my $url = 'https://familysearch.org/search/collection/results#count=20&query=%2Bevent_place_level_1%3A%22California%22%20%2Bevent_place_level_2%3A%22%LOCATION%%22%20%2Bbirth_year%3A%YEAR%-%YEAR%~%20%2Bgender%3AM%20%2Brace%3AWhite&collection_id=2000219';

open(O, ">out26.txt");
 my $oldh = select(O);
 $| = 1;
 select($oldh);
 while (my $location = <L>) {
     chomp($location);
     $location =~ s/ /+/g;
      foreach my $year (1923..1923) {
                 my $u = $url;
                 $u =~ s/%LOCATION%/$location/;
                 $u =~ s/%YEAR%/$year/;
                 #print "$u\n";
                 my $content = get($u);
                 my $val = 'unknown';
                 if ($content =~ / of .strong.([0-9,]+)..strong. /) {
                         $val = $1;
                 }
                 $val =~ s/,//g;
                 $location =~ s/\+/ /g;
                 print "'$location',$year,$val\n";
                 print O "'$location',$year,$val\n";
         }
     }

Update: API is not a viable solution. I have been in contact with the site developer. The API does not apply to that part of the webpage. Hence, any solution pertaining to JSON will not be applicbale.



Source: http://stackoverflow.com/questions/14654288/using-perl-to-scrape-a-website

Data Scraping using php

Here is my code

    $ip=$_SERVER['REMOTE_ADDR'];

    $url=file_get_contents("http://whatismyipaddress.com/ip/$ip");

    preg_match_all('/<th>(.*?)<\/th><td>(.*?)<\/td>/s',$url,$output,PREG_SET_ORDER);

    $isp=$output[1][2];

    $city=$output[9][2];

    $state=$output[8][2];

    $zipcode=$output[12][2];

    $country=$output[7][2];

    ?>
    <body>
    <table align="center">
    <tr><td>ISP :</td><td><?php echo $isp;?></td></tr>
    <tr><td>City :</td><td><?php echo $city;?></td></tr>
    <tr><td>State :</td><td><?php echo $state;?></td></tr>
    <tr><td>Zipcode :</td><td><?php echo $zipcode;?></td></tr>
    <tr><td>Country :</td><td><?php echo $country;?></td></tr>
    </table>
    </body>

How do I find out the ISP provider of a person viewing a PHP page?

Is it possible to use PHP to track or reveal it?

Error: http://i.imgur.com/LGWI8.png

Curl Scrapping

<?php
$curl_handle=curl_init();
curl_setopt( $curl_handle, CURLOPT_FOLLOWLOCATION, true );
$url='http://www.whatismyipaddress.com/ip/132.123.23.23';
curl_setopt($curl_handle, CURLOPT_URL,$url);
curl_setopt($curl_handle, CURLOPT_HTTPHEADER, Array("User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.15) Gecko/20080623 Firefox/2.0.0.15") );
curl_setopt($curl_handle, CURLOPT_CONNECTTIMEOUT, 2);
curl_setopt($curl_handle, CURLOPT_RETURNTRANSFER, 1);
curl_setopt($curl_handle, CURLOPT_USERAGENT, 'Your application name');
$query = curl_exec($curl_handle);

curl_close($curl_handle);
preg_match_all('/<th>(.*?)<\/th><td>(.*?)<\/td>/s',$url,$output,PREG_SET_ORDER);
echo $query;
$isp=$output[1][2];

$city=$output[9][2];

$state=$output[8][2];

$zipcode=$output[12][2];

$country=$output[7][2];
?>
<body>
<table align="center">
<tr><td>ISP :</td><td><?php echo $isp;?></td></tr>
<tr><td>City :</td><td><?php echo $city;?></td></tr>
<tr><td>State :</td><td><?php echo $state;?></td></tr>
<tr><td>Zipcode :</td><td><?php echo $zipcode;?></td></tr>
<tr><td>Country :</td><td><?php echo $country;?></td></tr>
</table>
</body>

Error: http://i.imgur.com/FJIq6.png

What's is wrong with my code here? Any alternative code , that i can use here.

I am not able to scrape that data as described here. http://i.imgur.com/FJIq6.png

P.S. Please post full code. It would be easier for me to understand.



Source: http://stackoverflow.com/questions/10461088/data-scraping-using-php

PDF scraping using R

I have been using the XML package successfully for extracting HTML tables but want to extend to PDF's. From previous questions it does not appear that there is a simple R solution but wondered if there had been any recent developments

Failing that, is there some way in Python (in which I am a complete Novice) to obtain and manipulate pdfs so that I could finish the job off with the R XML package

Extracting text from PDFs is hard, and nearly always requires lots of care.

I'd start with the command line tools such as pdftotext and see what they spit out. The problem is that PDFs can store the text in any order, can use awkward font encodings, and can do things like use ligature characters (the joined up 'ff' and 'ij' that you see in proper typesetting) to throw you.

pdftotext is installable on any Linux system



Source: http://stackoverflow.com/questions/7918718/pdf-scraping-using-r

Php Scraping data from a website

I am very new to programming and need a little help with getting data from a website and passing it into my PHP script.

The website is http://www.birthdatabase.com/.

I would like to plug in a name (First and Last) and retrieve the result. I know you can query the site by passing the name in the URL, but I am having problems scraping the results.

http://www.birthdatabase.com/cgi-bin/query.pl?textfield=FIRST&textfield2=LAST&age=&affid=

I am using the file_get_contents($URL) function to get the page but need help after that. Specifically, I would like to scrape only the results from a certain state if there are multiple results for that name.



You need the awesome simple_html_dom class.

With this class you can query the webpage's DOM in a similar way to jQuery.

First include the class in your page, then get the page content with this snippet:

$html = file_get_html('http://www.birthdatabase.com/cgi-bin/query.pl?textfield=' . $first . '&textfield2=' . $last . '&age=&affid=');

Then you can use CSS selections to scrape your data (something like this):

$n = 0;
foreach($html->find('table tbody tr td div font b table tbody') as $element) {
    @$row[$n]['tr']  = $element->find('tr')->text;
    $n++;
}

// output your data
print_r($row);



Source: http://stackoverflow.com/questions/15601584/php-scraping-data-from-a-website

Obtaining reddit data

I am interested in obtaining data from different reddit subreddits. Does anyone know

if there is a reddit/other api similar like twitter does to crawl all the pages?


Yes, reddit has an API that can be used for a variety of purposes such as data

collection, automatic commenting bots, or even to assist in subreddit moderation.

There are a few places to discover information on reddit's API:

    github reddit wiki -- provides the overview and rules for using reddit's API

(follow the rules)
    automatically generated API docs -- provides information on the requests needed to

access most of the API endpoints
    /r/redditdev -- the reddit community dedicated to answering questions both about

reddit's source code and about reddit's API

If there is a particular programming language you are already familiar with, you

should check out the existing set of API wrappers for various languages. Despite my

bias (I am the package maintainer) I am quite certain PRAW, for python, has support

for the largest number of reddit API features.



Source: http://stackoverflow.com/questions/14322834/obtaining-reddit-data

Scraping data in dynamic sites

I'm trying to scrape data from our local government. What I want is address from kids adoption offices. Here, in Brazil, all adoptions go through the government. So I have the URL of one office, there are 2 or 3 thousands more. But if I can manage to get one, the others will be easy. I made many attempts, bellow I show three.

The problem could be related to a Javascript (Ajax maybe) that refresh the page.

Note: I am not a PHP developer.

First attempt

echo '<html><head></head><body>';
echo '<h1>Scraper PHP GET 1</h1>';

echo ini_get("allow_url_fopen");
echo ini_get("allow_url_fopen");

// I used this url for test
//$url = 'http://www.portaldaadocao.com.br';

//This is the URL that I really want
$url = 'http://www.cnj.jus.br/cna/Controle/ConsultaPublicaBuscaControle.php?transacao=CONSULTA&vara=2673';

$html = file_get_contents($url);
var_dump($html);

echo '</body></html>';

// Output
// 11
// Warning:
file_get_contents(http://www.cnj.jus.br/cna/Controle/ConsultaPublicaBuscaControle.php?
transacao=CONSULTA&vara=2673) [function.file-get-contents]: failed to open stream: HTTP
request failed! HTTP/1.1 404 Not Found in /home/rsl/www/sc01_get.php on line 14
// bool(false)

Second attempt

echo '<html><head></head><body>';
echo '<h1>Scraper PHP CURL 3</h1>';

// I used this url for test
//$url = 'http://www.portaldaadocao.com.br';

//This is the URL that I really want
$url = 'http://www.cnj.jus.br/cna/Controle/ConsultaPublicaBuscaControle.php?transacao=CONSULTA&vara=2673';

$curl = curl_init($url);
@curl_setopt($curl, CURLOPT_POSTFIELDS, "foo");
@curl_setopt($curl, CURLOPT_FOLLOWLOCATION, true);
@curl_setopt($curl, CURLOPT_CUSTOMREQUEST, "POST");;

$html=@curl_exec($curl);

if (!$html) {
    echo "<br />cURL error number:" .curl_errno($curl);
    echo "<br />cURL error:" . curl_error($curl);
    exit;
}
else{
   echo '<br>begin HTML[';
    echo  $html;
   echo '<br>]end html ';
}
echo '</body></html>';

// Output
// 1

third attempt

function curl($url){
    $ch = curl_init();
    curl_setopt($ch, CURLOPT_URL, $url);
    curl_setopt($ch, CURLOPT_RETURNTRANSFER,1);
    curl_setopt($ch, CURLOPT_USERAGENT, 'Mozilla/5.0 (Windows NT 5.1) AppleWebKit/535.6 (KHTML, like Gecko) Chrome/16.0.897.0 Safari/535.6');
    curl_setopt($ch, CURLOPT_HEADER, true);
    curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
    curl_setopt($ch, CURLOPT_COOKIEFILE, "cookie.txt");
    curl_setopt($ch, CURLOPT_COOKIEJAR, "cookie.txt");
    curl_setopt($ch, CURLOPT_CONNECTTIMEOUT, 30);
    curl_setopt($ch, CURLOPT_REFERER, "http://www.windowsphone.com");

    $data = curl_exec($ch);
    curl_close($ch);
    return $data;
}

echo '<html><head></head><body>';
echo '<h1>Scraper PHP CURL 5</h1>';

// I used this url for test
//$url = 'http://www.portaldaadocao.com.br';

//This is the URL that I really want
$url = 'http://www.cnj.jus.br/cna/Controle/ConsultaPublicaBuscaControle.php?transacao=CONSULTA&vara=2673';

$curl = curl_init($url);
@curl_setopt($curl, CURLOPT_POSTFIELDS, "foo");
@curl_setopt($curl, CURLOPT_FOLLOWLOCATION, true);
@curl_setopt($curl, CURLOPT_CUSTOMREQUEST, "POST");;

$html=@curl($curl);


if (!$html) {
    echo "<br />cURL error number:" .curl_errno($curl);
    echo "<br />cURL error:" . curl_error($curl);
    exit;
}
else{
    echo '<br>begin HTML[';
    echo  $html;
    echo '<br>]end html ';
}
echo '</body></html>';

// Output
// cURL error number:0
// cURL error:

If the pages are really ajax based meaning the information that you need to scrape is loaded or shown through javascript execution, you will need another approach. You would need to automate with a real browser. You can go the Selenium route which can be written in a number of languages or use CasperJS with Javascript as the programming language.



Source: http://stackoverflow.com/questions/24611046/scraping-data-in-dynamic-sites