Why Hand-Scraped Flooring?

So many types of flooring possibilities exist on the market, so why hand-scraped hardwood and why now? Trends for hardwoods come and go. In recent years, the demand for exotic species has grown, and even more closer to the present, requests for hand-scraped flooring are also increasing. As a result, nearly all species are available hand-scraped, but walnut, hickory, cherry, and oak are the most popular.

In the past, parquet was a popular style of flooring, and while seldom seen in the present, parquet was characterized by an angular style and contrasting woods. Not relying on color, hand-scraped flooring instead goes for texture. The wood is typically scraped by hand, creating a rustic and unique look for every plank. But rather than be exclusively rough, some hand-scraped products have a smoother sculpted look, such as hand-sculpted hardwood, and this flooring is often considered "classic."

Texture, as well, makes the flooring have additional visual and tactile dimensions. Those walking on the floor may just want to run their hands over the surface to feel the knots, scraping, and sculpted portions. However, tastes for hand-scraped flooring vary by region. According to top hardwood manufacturer Armstrong, the sculpted look is more requested in California, while a rustic appearance of knots, mineral streaks, and graining is more common in the Southwest. The Northeast, on the other hand, is just catching onto this trend.

There's no one look for hand-scraped flooring. Rather, hardwood is altered through scraping or brushing, finishing, or aging; a combination of such techniques may also be used.

Scraped or brushed hardwoods are sold under names "wire brushed," which has accented grain and no sapwood; "hand-sculpted," which indicates a smoother distressed appearance; and "hand hewn and rough sawn," which describes the roughest product available.

Aged hand-scraped products go by "time worn aged" or "antique." For both of these, the wood is aged, and then the appearance is accented through dark-colored staining, highlighting the grain, or contouring. A lower grade of hardwood is used for antique.

A darker stain tends to bring out the look of hand-scraped flooring. For woods that have specifically been stained, "French bleed" is the most common. Such a product has deeper beveled edges, and joints are emphasized with a darker color stain.

No matter the look for hand-scraped flooring, the hardwood is altered by hand, generally by a trained craftsman, such as an Amish woodworker. As a result, every plank looks unique. However, "hand-scraped" and "distressed" are often used interchangeably, but not all "distressed" products are altered by hand. Instead, the hardwood is distressed by machine, which presses a pattern into the surface of the wood.

Source:http://www.articlesbase.com/home-improvement-articles/why-hand-scraped-flooring-5488704.html

Choose Mining Wear Parts Wisely

It is important to choose a reputable supplier of mining wear parts; one that has been acknowledged as a leader in mining expertise. You will want to research and seek out a company that specializes in the engineering, manufacturing, procurement and design of mining wear parts and who has access to a multitude of patterns and templates to choose from.

It is vital to find a company that invites you to put them to the test; a company that is committed to selling more than just a product, standing behind the parts that they design and manufacture with an unprecedented industry guarantee. Some companies are so confident in their products that each wear part is stamped with their logo, identifying it as a superior product.

You will also want to find a company that takes pride in establishing strong customer relationships and who employs people who are as equally committed to providing outstanding service with customer satisfaction a priority. Your research will help you find a mining wear parts company that guarantees that if they do not have the part available, that they will find it for you or are capable of custom designing products to your exact specifications.

If you stop to consider the ramifications of an equipment malfunction or breakdown on production quotas, the significance of reliable parts becomes readily apparent. The impact can be far reaching if it halts production while the necessary repairs are completed. The ugly reality is that downtime incurs financial losses.

While the cost of aftermarket replacement mining wear parts is one factor, the installation of the part is equally as important. It is vital that aftermarket parts are built to a rugged standard to endure the rigorous industrial demands placed on them. Mining wear parts are routinely subjected to high stress abrasion and impact. The fabricated parts need to have the structural strength to be wear resistant with extended usage. Hardened manganese is the preferred material of choice to impart added strength and avoid premature breakage and replacement. Using inferior quality parts may result in the necessity of replacing them prematurely if they do not withstand the wear and tear that they are subjected to daily. While a few dollars may be saved initially by purchasing inferior mining wear parts, production costs can dramatically increase if frequent breakdowns occur and manpower hours are wasted in the field. Efficient use of manpower is an important budget consideration. Reliability is an absolute necessity w
hen you have production deadlines to meet and operations can quickly grind to a standstill when production is halted.

Quality assurance management monitors the consistency of the parts, demanding that they are machined within precise measurements. In addition, they focus on striving to improve the quality of parts as new technology becomes available. Using precision made, high quality wear parts can make your business more competitive, giving you an advantage and improving your bottom line.

Source:http://ezinearticles.com/?Choose-Mining-Wear-Parts-Wisely&id=6691631

Affordable Tooth Extractions

In recent times, the cost of dental care has skyrocketed. This includes all types of dentistry including teeth cleaning, extractions, and dental surgery. For those who live in Denver, CO, there are many options to choose from when paying for routine or emergency dental care. In fact, having a tooth extraction Denver might just be more easily afforded than what some may be aware of.

The flat fee for a tooth extraction in Denver may vary between dental offices. The type of extraction can also cause a difference in the price. A simple extraction may cost between $60-$75, but a wisdom tooth extraction that requires more time and effort could cost much more.

One of the great aspects of having dental services performed in Denver is the variety of payment forms that many dental offices accept. Most dental offices in this area accept several different health insurance plans that will allow patients to only be required to pay a small copay at the time of service. If you have chosen an in-network dental provider for your plan, this copay can be even less.

Many dental offices also provide services to those who have state medicaid or medicare as well. While cosmetic dental work may not be covered by these forms of health care, extractions are covered because they are considered a necessary part of the patients good health. Yearly checkups and teeth cleanings are also normally covered as a preventative measure to avoid bad dental health.

For those who may not have any type of health insurance, dental insurance, or state provided health care plan, most dental offices will offer a payment plan. The total cost will be calculated and can be divided up over a few months to make dental care more easily affordable. This will need to be arranged before services and you may need to pay a percentage of the cost upfront before any dental work is performed.

So, if you live in the Denver area and need to have a tooth extraction or other dental care, do not fear that it is impossible to obtain. By calling each dental office and discussing the types of payment forms they accept, you may find a payment plan that fits your budget nicely. You can compare the prices and options of all dentists in your area so that you can make a well informed decision more easily.

Source:http://ezinearticles.com/?Affordable-Tooth-Extractions&id=3241427

Git workflow for Scrapy projects

Our customers often ask us what’s the best workflow for working with Scrapy projects. A popular approach we have seen and used in the past is to split the spiders folder (typically project/spiders) into two folders: project/spiders_prod and project/spiders_dev, and use the SPIDER_MODULES setting to control which spiders are loaded on each environment. This works reasonably well, until you have to make changes to common code used by many spiders (ie. code outside the spiders folder), for example common base spiders.

Nowadays, DVCS (in particular, git) have become more popular and people are quite used to branching, so we recommend using a simple git workflow (similar to GitHub flow) where you branch for every change you make. You keep all changes in a branch while they’re being tested and finally merge to master when they’re finished. This means that master branch is always stable and contains only “production-ready” spiders.

If you are using our Scrapy Cloud platform, you can have 2 projects (myproject-dev, myproject-prod) and use myproject-dev to test the changes in your branch.  scrapy deploy in Scrapy 0.17 now adds the branch name to the version name (when using version=GIT or version=HG), so you can see which branch you are going to run directly on the panel. This is particularly useful with large teams working on a single Scrapy project, to avoid stepping into each other when making changes to common code.

Here is a concrete example to illustrate how this workflow works:y

•    the developer decides to work on issue 123 (could be a new spider or fixes to an existing spider)
•    the developer creates a new branch to work on the issue
•    git checkout -b issue123
•    the developer finishes working on the code and deploys to the panel (this assumes scrapy.cfg is configured with a deploy target, and using version=GIT – see here for more information)
•    scrapy deploy dev
•    the developer goes into the panel and runs the spider, where he’ll see the branch name (issue123) that will be run
•    the developer checks the scraped data looks fine through the item browser in the panel
•    whenever issues are found, the developer makes more fixes (always working on the same branch) and deploys new versions
•    once all issues are fixed, the developer merges the branch and deploys to production project
•    git checkout master
•    git merge issue123
•    git pull # make sure to pull latest code before deploying
•    scrapy deploy prod

We recommend you keep your common spiders well-tested and use Spider Contracts extensively to test your final spiders. Otherwise experience tell us that base spiders end up being copied (instead of reused) out of fear of breaking old spiders that depend on them, thus turning their maintenance into a nightmare.

Source:http://blog.scrapinghub.com/2013/03/06/git-workflow-scrapy-projects/

A quick guide on web scraping: Why and how

Web scraping, which is the collection and cleaning of online data, is the first step in any
data-driven project. Here’s a short video that explains what scraping is, and how to create
automated scraping jobs using a digital tool.

This is a 15-minute video created by an instructor at Ohio State University. In the first six
minutes, the instructor talks about why we need web scraping; he then shows how to use a
scraping tool, OutWit Hub, to collect data scattered in a large database.

FYI: read reviews by Reporters’ Lab of OutWit Hub and other web scraping tools.

Source: http://www.mulinblog.com/quick-guide-web-scraping/